Custom Clamp For Wire Rope | Clamp For Wire Rope Cost

Wire rope clamps are typically made of metal and consist of a U-shaped bolt, a saddle, and two nuts. They are available in a range of sizes to fit different diameters of wire rope and can be used to create loops or thimbles in the rope.

Wire rope clamps, also known as wire rope clips or cable clamps, are used to secure the ends of wire ropes. One of the main benefits of wire rope clamps is their ability to provide a strong and secure connection without the need for specialized tools or equipment.

The primary function of wire rope clamps is to secure the ends of wire ropes. They work by clamping onto the rope and providing a strong and secure connection. Wire rope clamps can be used to create loops or thimbles in the rope, allowing it to be attached to other hardware such as hooks or shackles.

First, wrap the wire rope around the thimble or to form the eye, and turn back the correct amount of rope—as specified by the manufacturer.

Apply the first wire rope clip at the end of the dead end, with one base width of space. Use a torque wrench to tighten the nuts on the wire rope clip.

When applying the second clip (if required), place it as close to the eye loop or thimble as possible. Again, be sure to properly tighten the nuts of the clip with a torque wrench.

If more than two clips are required, the clips should be evenly spaced between the two that were placed first.